Heating Repair Services from Aabbott Ferraro

If you live in the Twin Cities MN metro, you have to be used to the chilly weather. Doesn’t mean you shouldn’t be able to keep comfy, though. There’s almost nothing more annoying then when your furnace or heating system goes out, leaving you without having heat, and the Minnesota winter slowly and gradually creeping inside.

Twin Cities HVAC Contractor Service

What do you do? Call for furnace repairs? Find an HVAC contractor immediately? Prior to deciding to take any of these steps, try and save a few dollars. The Aabbott Ferraro staff recommends you first do the following:

  1. Check the filter
    This is true of all heating and cooling systems. The filters must be examined on a regular basis, and cleaned and/or replaced as needed. A soiled filter will cause your furnace or HVAC system to overheat and turn on the safety switch.
  2. Is the Power On?
    It might seem like a silly question to ask, but make sure the power switch is on. If you don’t know what it is or what it looks like, look on all sides of the device for something that looks like a light switch.
  3. Look at the Thermostat
    Your lack of heat may very well be the thermostat not being set correctly. Is it turned on or set to heat? Is the set point higher than the temperatures in the home? Check out these issues before calling for assistance.
  4. Are the pipes impeded?
    Furnace pipes run outside, so make sure they are clear of snow and ice. The pipes will be PVC in more than 90% of scenarios, and older furnaces are vented through the roof.
  5. Perform a Power Cycle
    You might be able to get your home comfy again by simply turning off the furnace for a minute and then turning it back on. If this does the trick, you still should Contact Us so we can figure out exactly what transpired.

 

Heating Repair Contractor in Twin Cities MN

None of these worked and you still have no heating? Then get a furnace repair estimate or contact us immediately by calling (651) 776-7214. Here are probably the most typical furnace and heating troubles we’ve resolved in the Twin Cities area:

  • Lack of Maintenance
    If you don’t have frequent maintenance done to your furnace, you may be seeing issues. Not having it checked frequently can lead to breakdowns; poor ease and comfort; and elevated energy usage and frustrations.
  • Dirty or Clogged Filters
    These are among the biggest originators of air flow issues.
  • Air Flow Problems
    Issues with air flow stem usually from the fan motors, belts and bearings, which will lead to overheating and poor control.
  • Thermostat Malfunctions
    When you’re unable to operate the thermostat, you’re certain to lose heating, and have problems getting comfortable.
  • Pilot/Ignition Problems
    This will trigger only intermittent heating, or no hot air at all.

No heating? Then contact us today at (651) 776-7214 so we can get back your comfort! .